filthy loft
Information, help and tips on many areas of roofing including trusses, tiling, venting, insulation etc....

6 posts   •   Page 1 of 1
Steve007
Labourer
Labourer
Posts: 2
Joined: Sat Jul 18, 2009 7:57 am

filthy loft

by Steve007 » Sat Jul 18, 2009 8:13 am

Could anyone tell me if it is acceptable to pin a breathable type membrane to the rafters in the loft. The problem i have is the entry of dust through the tiles as i have an old house that is closeboarded btween the tiles not felt, hence the entry of dust making going up the loft like entering a coal mine. It just seems to me to be the most practical solution as the roof is sound.

rosebery
Project Manager
Project Manager
Posts: 2021
Joined: Wed Sep 26, 2007 9:55 pm

by rosebery » Sat Jul 18, 2009 11:05 pm

Yes no problem at all just don't take it all the way down as you must allow for air circulation within the roof - breathable membrane or not. Leave a six to nine inch gap at the bottom.

Cheers

stoneyboy
Project Manager
Project Manager
Posts: 6538
Joined: Wed Dec 10, 2008 6:44 pm

by stoneyboy » Sun Jul 19, 2009 5:24 pm

Steve007,
Line the whole loft - with a closeboarded unfelted roof there will plenty of ventilation - a gap is not necessary.
end

rosebery
Project Manager
Project Manager
Posts: 2021
Joined: Wed Sep 26, 2007 9:55 pm

by rosebery » Sun Jul 19, 2009 8:07 pm

Well in my opinion it is necessary to leave a small gap in order to be certain not to interfere with eaves to eaves ventilation that should be present to conform to the requirements of Part F of the Building regulations.

Reliance on gaps between the tiles, as SB seems to be suggesting, to provide ventilation seems to me to be rather inadequate.

Cheers

Steve007
Labourer
Labourer
Posts: 2
Joined: Sat Jul 18, 2009 7:57 am

by Steve007 » Sat Jul 25, 2009 10:57 am

Thanks very much fellas, I will attack it with gusto soon ha

TheDoctor4
Project Manager
Project Manager
Posts: 16777203
Joined: Tue Jul 24, 2007 10:12 am
Location: Somerset in the UK in Shepton mallet

Local help at hand!

by TheDoctor4 » Fri Jul 09, 2010 9:49 pm

Find trusted, insured and vetted tradesman local to your area. Visit the DIY Doctor Find a Tradesman page: https://www.diydoctor.org.uk/find_tradesmen/

6 posts   •   Page 1 of 1
It is currently Sun Dec 29, 2024 10:27 am