Fence cement block question
All manner of questions and solutions to problems and issues surrounding the subject of brickwork, blockwork and stonework

2 posts   •   Page 1 of 1
dugit
Apprentice
Apprentice
Posts: 18
Joined: Mon Nov 15, 2010 11:39 pm

Fence cement block question

by dugit » Wed Nov 17, 2010 9:01 am

I have a fence at the back of the garden which is up on a bank. It consists of nine slotted concrete posts in and the distance between each post is 6 feet. Also between the posts are cement blocks 17*8.5*8.5 inches . The present wooden fence panels which are slotted in between the concrete posts are 5ft in height by 6ft wide.
I was thinking of adding more cement blocks so that the wooden fence would then be say only 3feet in height,is it ok to add further blocks from a safety point of view and if so could the blocks may be the full height of the fence ?(reason I keep losing panels in the strong winds/rain)

welsh brickie
Project Manager
Project Manager
Posts: 2610
Joined: Sat Apr 12, 2008 8:54 am

fence panels

by welsh brickie » Wed Nov 17, 2010 12:21 pm

if you already have 5ft fence panels with the concrete base panel ,the standard length of the concrete post is 8feet,you should have 2 feet of concrete in the ground ,Assuming they havent cut the posts smaller you should be ok

2 posts   •   Page 1 of 1
It is currently Fri Nov 15, 2024 10:28 am