Underfloor insulation - can I do this?
Information, help, tips and advice on cavity walls, ceilings and lofts etc....

3 posts   •   Page 1 of 1
b9jobber
Labourer
Labourer
Posts: 2
Joined: Tue Nov 16, 2010 10:25 pm

Underfloor insulation - can I do this?

by b9jobber » Tue Nov 16, 2010 10:28 pm

I've got a 1930s semi with groundfloor suspended wooden floors.

I've taken up the carpets to expose the tong n groove floorboards - downside is the boards are cold in winter.

Just a thought - could I inject cavity wall insulation under floorbards to keep out draughts? The cavity is about 18" deep to soil.

I don't fancy pulling up each board to insulate under them - it'll cost an arm and a leg to replace split/damaged boards.

What do you think?

welsh brickie
Project Manager
Project Manager
Posts: 2610
Joined: Sat Apr 12, 2008 8:54 am

draughty floor

by welsh brickie » Wed Nov 17, 2010 12:48 pm

you could tack 3mm ply and tape the joints on the floor then relay the carpet.
It would cost a fortune to inject cavity wall insulation under the floor.And the gap under the joists is there for a reason it should be kept clear.

b9jobber
Labourer
Labourer
Posts: 2
Joined: Tue Nov 16, 2010 10:25 pm

Re: draughty floor

by b9jobber » Wed Nov 17, 2010 10:46 pm

welsh brickie wrote:you could tack 3mm ply and tape the joints on the floor then relay the carpet.
It would cost a fortune to inject cavity wall insulation under the floor.And the gap under the joists is there for a reason it should be kept clear.


cheers mate, but we like the exposed boards. Spose will have to suffer the cold..........

3 posts   •   Page 1 of 1
It is currently Sun Dec 22, 2024 2:21 pm