Greenstar 28i Water leaking from AAV
Help and information on all topics relating to your central heating, air conditioning and ventilation issues.

2 posts   •   Page 1 of 1
michaelconroy
Labourer
Labourer
Posts: 1
Joined: Wed Apr 06, 2011 12:37 pm

Greenstar 28i Water leaking from AAV

by michaelconroy » Wed Apr 06, 2011 12:39 pm

After bleeding the radiators the pressure on the boiler dropped below 1 bar. I had to partially refill the boiler. I realised then that water was escaping through the vent hole on the cap of the aav. I tightened the cap to stop the leak. Now I find, when the CH is on, that the water pressure is usually around 2.8 bar, but sometimes exceeds 3 bar.

Does this sound as though I need a new aav?

Should I normally leave the aav open slightly?

Thanks

Mike

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Wed Apr 06, 2011 6:58 pm

Yes you do need a new auto airvent - but this wont solve pressure problem.

Check combi fill is turned off correctly - could be expansion vessel at fault.

htg

2 posts   •   Page 1 of 1