by welsh brickie »
Thu Apr 28, 2011 11:43 am
[quote="andy01"]you can use strip foundations.
you will need to identify the tree type. and use nhbc 4.2 to work out the depth for the bottom of the foundations, which may be as deep as 2.5m down. compressible material may be required an the inside face of the founds and a slip membrane on the outside.
a suspended floor with adequate clearance will be required dependant on the volume change potential of the soil.
dependant on the tree type you may be too close too use nhbc 4.2
during planning a tree officer should have reviewed your plan. they may decide the tree is a worthy specimen and will insist on founds that do not harm the tree roots in which case a susended raft supported by pads down to the required depth (bearing capacity) may be required.
chopping down the tree and pretending it was never there will not stop the inevitable dessication and heave, and the structure will suffer from subsidance/ severe cracking
however your builder will either not know the above or not care as its too much work and so will just do as welsh brickie said - no this is not a dig at you[/quote]
What you mean is a TPO a (tree preservation order) if the tree was an endangered species or was considered to be of historic value an order would be imposed to stop any construction within a given boundry planning permission would not be permitted,this does not seem a problem