Plastering an old wall
Ask your questions and find answers on many subjects relating to plastering and dry lining

4 posts   •   Page 1 of 1
Maxvali
Labourer
Labourer
Posts: 3
Joined: Wed Jul 11, 2007 5:20 pm

Plastering an old wall

by Maxvali » Wed Jul 11, 2007 5:30 pm

Hi
I need to plaster an old wall that has plaster on it and what's on it is not too bad but needs going over to make it look good like the rest of the walls.
I am not a good plasterer ( to say the least ) any advice on the best way to do it. Thanks in advance. :?

Maxvali
Labourer
Labourer
Posts: 3
Joined: Wed Jul 11, 2007 5:20 pm

by Maxvali » Thu Jul 12, 2007 5:07 pm

Well that looks like it's drawn a blank!!!!!!!!!!!
Thanks for your help. :(

martin497
Apprentice
Apprentice
Posts: 18
Joined: Mon Jul 02, 2007 5:21 pm

by martin497 » Thu Jul 12, 2007 7:56 pm

Hi Maxvali,
I am a plasterer and would strongly advise you not to attempt to fully plaster the wall yourself if you havn't much experience.
If the wall aint to bad then you can always just fill in the low spots with polyfilla and when dry sand the whole thing down, very dusty though...!

Maxvali
Labourer
Labourer
Posts: 3
Joined: Wed Jul 11, 2007 5:20 pm

by Maxvali » Fri Jul 13, 2007 1:54 pm

Hi Martin
Thanks for that I think I will do as you say and fill it. It's a very old building so it will look OK.

regards

Maxvali

4 posts   •   Page 1 of 1
It is currently Wed Nov 27, 2024 2:10 am