Electric shower wiring Ask questions and find answers to many subjects relating to electrics and electrical work

[Carbs]

We've been in our new house for going on a year now and I've recently noticed that the 10.5kW electric shower that was here when we moved in is wired using 6mm cable. On top of this, its wire type fuse on the consumer unit is only 30A.

My understanding is that a shower with that rating needs a 45A fuse and 10mm cable and whilst it has been working fine so far, I am now paranoid that something is going to burst into flames at any moment.

Can anyone help?

[BLAKEY1963]

[quote="Carbs"]We've been in our new house for going on a year now and I've recently noticed that the 10.5kW electric shower that was here when we moved in is wired using 6mm cable. On top of this, its wire type fuse on the consumer unit is only 30A.

My understanding is that a shower with that rating needs a 45A fuse and 10mm cable and whilst it has been working fine so far, I am now paranoid that something is going to burst into flames at any moment.

Can anyone help?[/quote]

CARBS
GET YOUR LOCAL PART P ELECTICIAN , WHO IS REGISTERED
ON ONE OF THE SELF CERTIFICATION SCHEMES ( E.C.A , NAPPIT , NICEIC ) , HE WILL TELL YOU WHICH ONE HE IS REGISTERED WITH.
ASK HIM TO CHANGE CABLE AND MCB TO APPROPIATE VALUES AS U HAVE STATED , AND HE WILL GIVE U ELECTRICAL INSTALLATION CERT
FOR WORK DONE . PART P FOLLOWS FROM SCHEME PROVIDER.
VALID FOR 10 YEARS UP TO NEXT PERIODIC.
BLAKEY1963

[Carbs]

CARBS
GET YOUR LOCAL PART P ELECTICIAN , WHO IS REGISTERED
ON ONE OF THE SELF CERTIFICATION SCHEMES ( E.C.A , NAPPIT , NICEIC ) , HE WILL TELL YOU WHICH ONE HE IS REGISTERED WITH.
ASK HIM TO CHANGE CABLE AND MCB TO APPROPIATE VALUES AS U HAVE STATED , AND HE WILL GIVE U ELECTRICAL INSTALLATION CERT
FOR WORK DONE . PART P FOLLOWS FROM SCHEME PROVIDER.
VALID FOR 10 YEARS UP TO NEXT PERIODIC.
BLAKEY1963[/quote]


Thanks Blakey1963

Does this mean that the current set up is dangerous? Should we stop using the shower?

[BLAKEY1963]

[quote="Carbs"]CARBS
GET YOUR LOCAL PART P ELECTICIAN , WHO IS REGISTERED
ON ONE OF THE SELF CERTIFICATION SCHEMES ( E.C.A , NAPPIT , NICEIC ) , HE WILL TELL YOU WHICH ONE HE IS REGISTERED WITH.
ASK HIM TO CHANGE CABLE AND MCB TO APPROPIATE VALUES AS U HAVE STATED , AND HE WILL GIVE U ELECTRICAL INSTALLATION CERT
FOR WORK DONE . PART P FOLLOWS FROM SCHEME PROVIDER.
VALID FOR 10 YEARS UP TO NEXT PERIODIC.
BLAKEY1963[/quote]


Thanks Blakey1963

Does this mean that the current set up is dangerous? Should we stop using the shower?[/quote]

CARBS
OBVIOUSLY THE UNIT WILL OPERATE UNDER CURRENT SET UP
BUT THE 6MM2 IS UNDER RATED AND BE INCREASING IN CONDUCTOR OPERATING TEMPERATURE WHEN SHOWER DRAWING
FULL CURRENT. PROTECTIVE DEVICE IS ALSO BEING ALLOWED TO
CARRY EXCESSIVE CURRENT ABOVE ITS RATING, SO IT WOULD BE A GOOD IDEA TO REFRAIN FROM USING THE SHOWER AND GET THE
WORK CARRIED OUT ASAP.
BLAKEY1963

[Carbs]

Will do Blakey1963.

Thanks for your advice

[paul g]

Make sure also that the shower is earthed properly.

[Carbs]

Thanks Paul G.