by 2tellytel »
Fri Feb 22, 2013 11:56 am
Obviously not there to see exactly what set up you have but the pipe you describe as over flow, sounds like the vent pipe which goes to feed and expansion tank via the boiler and is installed to vent the system if it over heats. You can go to
www.socket2em.co.uk and click on "my plumbing" to see drawings etc.
However if you have a pump on the circuit, in some cases having the setting too high can cause water to pump out the vent especially if small no of rads.
Need to know more about your system to give definitive answer
Is your boiler solid fuel, oil or gas.?