I have a Baxi solo boiler on an open vented pumped system. I can get the boiler to start on hot water demand but not for CH only. I have a voltage input to the diverter valve on CH demand but the pump does not run and the boiler does not fire. I was told it was the diverter valve motor controller and this has been replaced with no change. The room thermostat and immersion thermostats both function and control the diverter valve but the boiler and pump will only start when hot water is demanded together with CH. Any suggestions please?
A supplementary question; how does the boiler 'know' the pump is running and is safe to start?