We had a plaster skim put over Artex, but stupidly painted vinyl emulsion onto it. We scraped and sanded all that off, which obviously took the top off the plaster. That was several months ago.
Yesterday, we wiped the plaster down with a mild sugar soap solution (it's in a kitchen, so had accumulated airborne grease etc).
Once that was dry, we put a mist coat of trade matt emulsion onto the plaster. This was like waterery milk, more than 50/50 easily.
It looked to be going well, and today was dry and seemed to have soaked in nicely.
However, we put a matt tester colour on top today, and once dry, to my horror, the tester coat could be scratched off with my (bitten) fingernail!
I then took a wet sponge to the misted area, and can virtually wipe off the mist coat back to the plaster, with some effort! It doesn't appear to have absorbed into the plaster, but it doesn't scrape or scratch off, it's only when wetted that is seems to come off. Much like, i guess, whitewash would on glass when wetted.
What have I done wrong, or is this normal? Do i need to mist again? Would a further coat be likely to be absorbed?
My guess with the tester colour, is that there was still absorbsion in the plaster, but because it was thicker paint, it sat on top much like vinyl does?
Was the mist coat too thin? I am worried that if i put a further mist coat on top, and it isn't absorbed, i am going to be in a right mess trying to get the matt off again like i did with the vinyl.
Could the plaster be damaged from all that went before?
What are my options for wallpapering, as this is seriously now fast becoming an option! Same process for sealing the plaster?
Or try a purpose made sealer on the wall instead of the trial and error i'm putting myself through?
Feeling desperate and in despair... and need some sound advice.
