silicone sealer
Fillers, sealants and adhesives for all types of DIY work. Help, advice and information on all aspects of this subject

6 posts   •   Page 1 of 1
andy stuart
Labourer
Labourer
Posts: 4
Joined: Wed Mar 21, 2007 9:06 am

silicone sealer

by andy stuart » Wed Mar 21, 2007 9:10 am

how to get rid of excess sealant on an aluminium shower door support silicone sealer remover is not to be used on aluminium

thedoctor
Posts: 2530
Joined: Sat Apr 08, 2006 1:15 pm

by thedoctor » Wed Mar 21, 2007 10:54 pm

Very careful scraping with a hobby knife blade Andy

andy stuart
Labourer
Labourer
Posts: 4
Joined: Wed Mar 21, 2007 9:06 am

by andy stuart » Thu Mar 22, 2007 8:37 am

thanks kind of thought that was my only option, was praying for some chemical solution

Chivs
Apprentice
Apprentice
Posts: 6
Joined: Mon Mar 05, 2007 1:34 pm

by Chivs » Thu Mar 22, 2007 3:13 pm

There is a chemical product you can get in Focus. it is in a tube in the fillers section and it is a silicone remover. It stinks like hell and wear gloves. Sorry cannot remember the make. Homebase sell it too. :)

Measure_twice_cut_once
Labourer
Labourer
Posts: 4
Joined: Mon Mar 26, 2007 11:17 am

silicone remover

by Measure_twice_cut_once » Tue Apr 03, 2007 9:13 am

You can buy silicone remover from screwfix. I've used it a few times, it works really well but may need a second application if the sealant to be removed is quite thick. I would avoid using too sharp a knife to remove sealant as you can nick the edge of a plastic bath/shower of even cut into the aluminium. See the removing sealant project.

carhartt kid
Labourer
Labourer
Posts: 4
Joined: Thu Apr 12, 2007 5:26 pm

by carhartt kid » Thu Apr 12, 2007 5:39 pm

Ditto, the stuff from Screwfix is fine on steel and aluminium. Good stuff, but stinks like rotten oranges???? Weird???? I might try some rotten oranges to remove silicone, you never know!

6 posts   •   Page 1 of 1
It is currently Sun Nov 24, 2024 11:20 am