Low water pressure options - want to install a second shower and new boiler
All aspects of plumbing questions and answers, help, tips and information

2 posts   •   Page 1 of 1
jfm243
Labourer
Labourer
Posts: 1
Joined: Sat Feb 21, 2015 7:34 pm

Low water pressure options - want to install a second shower and new boiler

by jfm243 » Sat Feb 21, 2015 8:10 pm

We have low pressure from the main, 1.5-2 Bar at 25-50 litres/min. By the time it runs through old pipe into house this flow drops to 5 litres/min at kitchen tap(suspect old pipe from main to house?!)

At the moment we have one shower than runs with a noisy booster pump

We want to add a further shower & change our very old boiler

So, the options I think we have are:

Either, try & increase water pressure. Perhaps change old water pipe so that we are getting good flow rate (25 litres/min+) into house at 1.5-2 Bar then change boiler & perhaps use megaflow and do away with need for booster pumps. Is this a viable solution with this water pressure(i.e. using megaflow)? Is there another way?

Or, option 2 would be to install larger booster pump that could handle 2 showers, but we are trying to avoid this noisy solution if at all possible with the water pressure we have

Any thoughts much appreciated

SimplyHandyman
Labourer
Labourer
Posts: 3
Joined: Tue Feb 24, 2015 4:54 pm

Re: Low water pressure options - want to install a second shower and new boiler

by SimplyHandyman » Tue Feb 24, 2015 6:08 pm

Running new water supply to the house is the only solution in your case. Very likely you are having old lead pipe so it's not healthy as well

2 posts   •   Page 1 of 1
It is currently Sat Nov 23, 2024 1:04 pm