Roof Beams
Kitchens, doors, rails, stud, tables, chairs, stair cases, garden furniture etc... Find answers and ask questions here!

2 posts   •   Page 1 of 1
A Booker
Labourer
Labourer
Posts: 1
Joined: Wed Jul 11, 2007 3:17 pm

Roof Beams

by A Booker » Wed Jul 11, 2007 3:29 pm

Hello, I am renovating a 1930s bungalow and the beams which support the main roof structure have been removed. These are the beams which run from the centre of the loft floor at about 45 degrees to support the cross beams on each side of the roof. I know that this house originally had these beams and I want to replace them so that the roof is properly supported. Could you please tell me what size of wood I should use and/or what size and type of wood the original beams would have been on this age of house. Thanks

Kain
Apprentice
Apprentice
Posts: 8
Joined: Thu Jul 26, 2007 8:12 pm

by Kain » Thu Jul 26, 2007 10:32 pm

Hi,

4"x2" sawn timber is fine for this job. Make sure the timber is dry before you install. Do not fix the struts to just a single joist below the purlin. Run a peice of timber parallel with the purlin to enable struts to sit on. This will spread the load better.

Hope this helps.

2 posts   •   Page 1 of 1
It is currently Mon Dec 23, 2024 4:52 am