Main navigation


Search found 10 matches

  Go to advanced search
by DeanThomas
Wed Dec 28, 2016 10:05 am
Forum: Bathrooms, Drainage and Waste Plumbing Forum
Topic: Bathroom basin mixer taps with low pressure hot water
Replies: 2
Views: 4601

Re: Bathroom basin mixer taps with low pressure hot water

the cold and hot are both fed by gravity , I will check the dia of flexible hoses . many thanks for help
by DeanThomas
Fri Dec 23, 2016 6:11 pm
Forum: Bathrooms, Drainage and Waste Plumbing Forum
Topic: Bathroom basin mixer taps with low pressure hot water
Replies: 2
Views: 4601

Bathroom basin mixer taps with low pressure hot water

we have just had the tap installed, it said on the description that it was high and low pressure, the cold comes out quite fast as per the old one, but the hot has not much pressure , was there something the plumber should have changed on the tap, to change it from high to low pressure .
by DeanThomas
Sun Feb 16, 2014 10:12 am
Forum: Hand and Power Tools Forum
Topic: EXAKT saws being withdrawn from range?
Replies: 1
Views: 2371

EXAKT saws being withdrawn from range?

I have a Exakt PS 150 saw and have noticed it has been withdrawn from their selling range. Has any one heard why.
by DeanThomas
Thu Dec 20, 2012 8:32 am
Forum: Hand and Power Tools Forum
Topic: battery charging
Replies: 1
Views: 3153

battery charging

I have a Nu tool cordless electric drill, Which I bought second hand and both the batteries were charged up and it worked really well but there was no instuction book and I dont know how long to charge the batteries for , they are 20.4 volts. Can anybody help ?.
by DeanThomas
Thu Aug 23, 2012 8:57 pm
Forum: Hand and Power Tools Forum
Topic: nu tool electric drill model NPK204c
Replies: 0
Views: 2528

nu tool electric drill model NPK204c

I have just been given the above secondhand drill , without the manual. Every things works OK except I can't operate the change from the drilling mode to the hammer one, it appears you turn the top collar so that the hammer sign is in line with the arrow, but it wont rotate, Has any body any idea ho...
by DeanThomas
Tue Aug 30, 2011 8:58 am
Forum: Hand and Power Tools Forum
Topic: Parkside SDS+hammer Drill
Replies: 2
Views: 10223

Re: Parkside SDS+hammer Drill

Many thanks for your advice. I tried it out and it works,in position C it turns so you can line the flat blade as you want then turn to position D and chisel is locked and it works. the instruction book is very poorly written.
by DeanThomas
Sun Aug 28, 2011 9:08 am
Forum: Hand and Power Tools Forum
Topic: Parkside SDS+hammer Drill
Replies: 2
Views: 10223

Parkside SDS+hammer Drill

I have just bought off E-bay a unused Parkside SDS+Hammer drill ( unwanted gift ). on reading the instructions I am confused about the Drill/Hammer drill/ Chisel selector switch, for chiseling it says turn the selector switch to position C in this position the chisel is not locked. then it says for ...
by DeanThomas
Thu Jul 15, 2010 12:00 pm
Forum: Hand and Power Tools Forum
Topic: Power Performace Table Saw
Replies: 0
Views: 6801

Power Performace Table Saw

some time ago I bought this saw a 254 mm table saw model no FMTC1500Tk from B & Q. I had not used it much until recently when it was used quite a lot and I decided to change the blade, the instuction book said put spanner on the blade bolt and another one to hold the spindle fast, but there is n...
by DeanThomas
Sat Feb 09, 2008 2:05 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Chattering thermostatic valves
Replies: 3
Views: 5161

Thanks for advice.I have turned down the pump speed from high to medium and it has solved some what the problem, they don't chatter as much. All the valves are two way flow so next job is when they start is to decrease or increase the flow by closing or opening the lock valve to see what effect that...
by DeanThomas
Sat Feb 02, 2008 1:33 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Chattering thermostatic valves
Replies: 3
Views: 5161

Chattering thermostatic valves

We are having a problem after the central heating has warmed up we get abanging/chattering in the pipes, upon ajusting one or other of the vales it stops or if we turn down the boiler themostat. Should all the lock vales be fully open when you have thermostatic vales ? or should they be part open. W...
It is currently Fri Nov 22, 2024 9:00 pm
Go to advanced search