Main navigation


Search found 26 matches

  Go to advanced search
by misery
Sat Dec 18, 2010 10:33 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: iconsistent hot water temp !!
Replies: 8
Views: 5208

thanks stoneyboy
I was hoping someone might be able to help with the problem before I called someone in .
by misery
Wed Dec 08, 2010 7:48 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: iconsistent hot water temp !!
Replies: 8
Views: 5208

iconsistent hot water temp !!

Hi guys Have posted this problem in plumbing section 3 times now with no reply,so can only assume was in the wrong section or my question is really stupid ,please help. I have a Heatline C28 combi boiler which works perfect for the central heating,but having a problem with the hot water .when the ho...
by misery
Sun Dec 05, 2010 6:33 pm
Forum: Plumbing Forum
Topic: hot water temp not consistent
Replies: 0
Views: 2678

hot water temp not consistent

Please guys would appreciate some advice . I have a Heatline c28 condensing combi boiler which was fitted around 18 months ago. When I try to run the bath the hot water temperature fluctuates between very hot and mildly tepid ,resulting in the filled bath being not very hot at all.I have noticed the...
by misery
Fri Dec 03, 2010 2:50 pm
Forum: Plumbing Forum
Topic: Inconsistant hot water
Replies: 0
Views: 2435

Inconsistant hot water

Could somebody please advise on a problem I have with inconsistant temp from the hot water tap when running a bath,actually its the same with every tap in the house ,except the shower where temp seems constant.
The boiler is a Heatline c28 combi fitted arond 18 months ago.
Many thanks
Misery
by misery
Mon Nov 29, 2010 7:49 pm
Forum: Plumbing Forum
Topic: water running hot then cold ,hot etc
Replies: 0
Views: 3831

water running hot then cold ,hot etc

Hi would appreciate any advice please. Have a HeatLine C28 combi boiler fitted about 18 months ago after a few initial problems (for which I received advice from this site) everything has been working ok. The problem I have now is that when running a bath the water will be hot for a while then will ...
by misery
Sun Feb 01, 2009 7:34 pm
Forum: Electrics Forum
Topic: earth bonding
Replies: 2
Views: 2980

earth bonding

Hi guys, Have just had new combi boiler fitted hence all pipework and tanks in loft now redundant. The main earthing wire from the cu was cross bonding all the pipework up there have pulled it through wall to under bathroom floor level,have had 2 new rads ,new bath and sink in bathroom so have used ...
by misery
Sun Feb 01, 2009 7:12 pm
Forum: Electrics Forum
Topic: Fitting a dimmer switch to gu10 mains light fitting with led
Replies: 3
Views: 4227

Thanks for the quick responses guys as long as safe and wont damage the fitting I'm happy,thanks again.
Misery
by misery
Sat Jan 31, 2009 7:36 pm
Forum: Electrics Forum
Topic: Fitting a dimmer switch to gu10 mains light fitting with led
Replies: 3
Views: 4227

Fitting a dimmer switch to gu10 mains light fitting with led

Hi, Have puchased a chrome 4 bar mains gu10 halogen spotlight from Wickes. The instructions are general instructions for all of their light fittings it seems. I know you can fit a dimming switch to mains gu10 lamps but this fitting has 15 decorative led's along the chrome bar at the top of the fitti...
by misery
Thu Jan 22, 2009 9:46 pm
Forum: Bathrooms, Drainage and Waste Plumbing Forum
Topic: wc problem
Replies: 4
Views: 3692

Thanks swidders for taking time to respond,forgot to say there are no fixing holes in the cistern just fits straight onto pan think will try and tilt it back and wedge to start and if it doesnt work will most probably silicon top of cistern like you said,thanks again,
Misery
by misery
Thu Jan 22, 2009 9:38 pm
Forum: Plumbing Forum
Topic: Grohe shower problem !
Replies: 4
Views: 15407

Hi Plumbob thanks for your reply wife thinks shower has improved now although we are now getting a high pitched whirring sound in the pipework.I can only describe it like a wc cistern when very nearly full makes that same noise which builds up until cistern is full and water shuts off! Does this mak...
by misery
Mon Jan 19, 2009 12:44 am
Forum: Bathrooms, Drainage and Waste Plumbing Forum
Topic: wc problem
Replies: 4
Views: 3692

wc problem

Hi just about to fit a new close coupled wc in new bathroom .Had a bit of a night mare tiling uneven walls now there is about a 12mm gap betweem cistern and tiled wall. Would it be possible to tilt cistern back slightly trim the doughnut washer and put very thick bead of silicon around hole in pan a...
by misery
Fri Jan 16, 2009 11:19 pm
Forum: Plumbing Forum
Topic: Grohe shower problem !
Replies: 4
Views: 15407

Grohe shower problem !

Hi have just installed a Grohe Avensys 34 041 mixer shower,the insruction manual regarding flow limiters is a bit confusing to a novice like me!. I believe I have 3 bar mains pressure coming into the house the shower is running off a Heatline 28 kw combi boiler with a flow rate of 13 lpm .I am not o...
by misery
Mon Oct 13, 2008 12:31 am
Forum: Plumbing Forum
Topic: New combi,problem with rads !! urgent help needed!
Replies: 4
Views: 3006

Hi Plumbob, Thanks for the reply,did in fact change the flow and return pipes today and still the same, so frustrating!! I take on board what you say about sludge,trouble is everything was working fine with the old boiler,sludge or not,but as you say new boilers probably more sensitive. Just to be c...
by misery
Sun Oct 12, 2008 12:36 am
Forum: Plumbing Forum
Topic: New combi,problem with rads !! urgent help needed!
Replies: 4
Views: 3006

new combi problem with rads!!urgent help needed!

Hi Plumbob, Tried what you suggested,still no joy. I actually took off two big rads in dining room and lounge ,they were full of sludge ,even after flushing and draining down 3 times ! Have left them off completely ,have some new ones to replace them with at a later date. The only other rad left dow...
by misery
Sun Oct 05, 2008 4:39 pm
Forum: Plumbing Forum
Topic: New combi,problem with rads !! urgent help needed!
Replies: 4
Views: 3006

New combi,problem with rads !! urgent help needed!

Hi guys , Had a new combi boiler fitted yesterday,I ran all the new pipework (except Htg flow and return) and gas connection ,corgi guy came to commision and do final connections. He diconnected flow and return pipes from old boiler (baxi solo 50/4rs) and connected onto new system (Heatline c28) The...
It is currently Fri Nov 22, 2024 9:26 pm
Go to advanced search