Main navigation


Search found 19 matches

  Go to advanced search
by property man
Fri Nov 23, 2007 10:06 pm
Forum: Roofing Repair and Construction Forum
Topic: Please help me roof my workshop :-)
Replies: 1
Views: 3713

how do you plan to get the boat out as a cut roof has 450 centers
by property man
Fri Nov 23, 2007 10:02 pm
Forum: Roofing Repair and Construction Forum
Topic: Lining the underside of the roof
Replies: 1
Views: 5239

The idea of a membrane is to carry water to the guttering in the event that a tile or tiles which become damaged or missing, what you are planning to do is a waste of time it should be on top of the rafters and dressed in to the guttering using felt support trays to stop rot and flapping felt
by property man
Fri Nov 23, 2007 9:51 pm
Forum: Roofing Repair and Construction Forum
Topic: Asbestos soffit board
Replies: 2
Views: 4673

Why dont you use over facia vents
by property man
Fri Nov 16, 2007 7:10 am
Forum: Flooring and Floor Coverings Forum
Topic: How do I raise Joists???
Replies: 5
Views: 5372

remove flooring and level joists with strips of wood nailed to the top start at the highest point in the room then relay floor with p5 boards nailed and glued
by property man
Fri Nov 16, 2007 6:53 am
Forum: Appliances in the Home Forum
Topic: MOVING BOILER INTO BRICK SHED OUTSIDE HOUSE
Replies: 5
Views: 12985

max hight for an extension is 3mt with a flat roof and 4mt with a pitch roof
and must be under 70 meters cube this is classed as permited development
by property man
Fri Nov 16, 2007 6:45 am
Forum: Appliances in the Home Forum
Topic: gas cooker in a kitchen
Replies: 3
Views: 4144

PS dont forget to chain the cooker to the wall
by property man
Fri Nov 16, 2007 6:43 am
Forum: Appliances in the Home Forum
Topic: new rads
Replies: 6
Views: 3827

1800 x 700 double required aprox £350.00 plus
by property man
Fri Nov 16, 2007 6:42 am
Forum: Appliances in the Home Forum
Topic: Combi Boiler
Replies: 5
Views: 3951

Use the blow of valve this will drain to the outside to save mess
by property man
Fri Nov 16, 2007 6:37 am
Forum: Brickwork and Blockwork Forum
Topic: Can I use a cavity lintel
Replies: 3
Views: 3791

He is right a RSJ is better also you will need calcs for the steel as you cannot just use any
by property man
Thu Nov 15, 2007 5:25 pm
Forum: Carpentry and Joinery Forum
Topic: how do I get a nice striaght line using a router
Replies: 5
Views: 6598

use a circular saw and set the depth to 7mm and rip 2 cut down and then use a chisel to remove the remainder or buy dual sided skirting this will have a gap at the bottom for wires to run behind or third option is to scrape a groove in the plaster behind the skirt and put the wires there option 2 it...
by property man
Wed Nov 14, 2007 6:41 am
Forum: Building Regulations and Planning Permission Forum
Topic: Unqualified tradesmen
Replies: 3
Views: 3835

£ 5000.00 FINE fitting or touching boilers
by property man
Wed Nov 14, 2007 6:33 am
Forum: Plumbing Forum
Topic: Back to the wall toilet waste
Replies: 1
Views: 2855

PLUMB CENTER do large pipe collers would look better with new panel
by property man
Sun Nov 11, 2007 10:03 pm
Forum: Carpentry and Joinery Forum
Topic: how do I get a nice striaght line using a router
Replies: 5
Views: 6598

hire a router table
by property man
Sun Nov 11, 2007 9:54 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Radiator that goes click
Replies: 6
Views: 3987

Try closing down the lockshield valve had to repair a rad with the same fault and this cured the problem as it eas open fully also was first off the boiler.
by property man
Sat Nov 10, 2007 8:39 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Hot water only works when radiators are on
Replies: 2
Views: 3057

Diverter valves can cost £120+vat for the part plus 1.5 hours labour to replace
It is currently Wed May 29, 2024 1:43 am
Go to advanced search