hi there. immersion hasnt been heating water. tests resistance and wiring snd all is ok. but the reset button had melted!! without going to the hassle of replacing the entire immersion would it be possible just to swop out the thermostat for one with a rest button on it and connect the wiring direct...
many thanks for your reply. The cooker itself came prewired with a 2.5mm cable. the induction hob came and specified a 2.5mm cable to be used also. The unit would be less than 3 metre cable on it from the fuse/cooker+hob. This is currently a 6mm cable to the Cooker switch and then 6mm cable into a b...
Hi there. Have just removed an old cooker/with hob unit from.kitchen, have an isolated 6mm connection separately fused switch New cooker has a seperate hob. Both have 2.5mm connections on them Is it just a matter of connecting both the hob and the cooker into the terminal connection I have at the en...
I see nothing in instructions which says a neutral should be connected, it would seem line in P1 and to heater line out 2. The terminal 1 would not be used. Thanks for that. There is three therminals on the unit. P1 1 2 Are you reccommending to connect Live from plug to p1 And 2 to live of pump ? I...
Hi there. Need to install an emeti b2000 pipe thermostat. That will have a plug - thermostat - pump as it's setup . Would anyone be able to advise on the wiring. Copy of wiring detail that came with stat and stat itself.
