Connecting Nest to Greenstar 30i
Help and information on all topics relating to your central heating, air conditioning and ventilation issues.

2 posts   •   Page 1 of 1
CharlieGM
Labourer
Labourer
Posts: 1
Joined: Wed Jan 22, 2020 3:53 pm

Connecting Nest to Greenstar 30i

by CharlieGM » Wed Jan 22, 2020 4:05 pm

Hi all, I'm trying to connect a Nest Heat Link to my Greenstar 30i boiler - I've attached the wires as shown in the photos; the Nest is connecting with the Link, but the link is not turning on the heat. Can you tell me what I've done wrong, or if there is a problem with the internal thermostat still being connected? Thanks!
Attachments
IMG_7582.jpeg
IMG_7585.jpeg

ericmark
Project Manager
Project Manager
Posts: 2869
Joined: Fri Oct 02, 2009 9:49 pm
Location: Llanfair Caereinion, Mid Wales.

Re: Connecting Nest to Greenstar 30i

by ericmark » Wed Jan 22, 2020 11:42 pm

[attachment=0]bosch-temp.jpg[/attachment]
The instructions tell you to remove link, sure you can down load instructions just as easy as me.
I am told to open the junction box on the Worcester Bosch you disturb seals, and it needs a gas safe person to re-seal, as a result I have never opened one, I am also told Worcester Bosch is not OpenTherm although it does have a special thermostat that will work direct onto the ebus, and the unit fits inside the boiler.

I did a goggle for "worcester 30i boiler installation manual" don't forget installation in the hunt word, I see it shows both central heating and domestic hot water, don't quite under stand this as thought it was a combi boiler?
Attachments
bosch-temp.jpg

2 posts   •   Page 1 of 1