Problem repairing botched removal of previous finish on bathroom wall
General decorating topics, questions and answers. find help, tips and advice on completing your decorating projects

2 posts   •   Page 1 of 1
tagette
Labourer
Labourer
Posts: 1
Joined: Wed Jun 08, 2022 7:41 pm

Problem repairing botched removal of previous finish on bathroom wall

by tagette » Wed Jun 08, 2022 8:35 pm

I am trying to identify the finish on the bathroom wall and repair my daughter's well meaning attempts to strip the wall of it.
The house is a 1930's semi.
In the attached photo you can see the finish is pink and highly glossy.
Paper is part of it so it is perhaps wall paper that has had a gloss finish.
It was difficult to get off and when it does, chips off to reveal bare plaster beneath. Unfortunately before we could stop her she had removed a considerable amount on one wall and a few large patches elsewhere.
My problem is do I
a) skim the plaster with something else to get a level surface, seal it,
sand the glossy surface to give a key, then decorate over with a suitable bathroom paint.
b) do I seal the plaster with masonry paint, apply something to level it up, sand the glossy surface, then paint over it with a bathroom paint
c) remove the hard surface layer altogether and do a or c. If so, how?
Attachments
rsz_hard_glossy_pink_finish_and_paper.jpg
rsz_plaster_beneath_finish.jpg

stoneyboy
Project Manager
Project Manager
Posts: 6532
Joined: Wed Dec 10, 2008 6:44 pm

Re: Problem repairing botched removal of previous finish on bathroom wall

by stoneyboy » Fri Jun 10, 2022 9:14 pm

Hi tagette,
It looks like the original finish was plaster with a blue oil based paint applied to it. Strip the paper back to the blue finish, fill unfinished areas, then sand and paint. Don't forget to prime any new plaster.
Regards S

2 posts   •   Page 1 of 1
It is currently Sat Nov 09, 2024 2:25 am