worn wooden floor
information and advice on general building topics, builders merchants, problem builders, DIY Stores etc....

3 posts   •   Page 1 of 1
mustdo
Apprentice
Apprentice
Posts: 5
Joined: Fri May 07, 2010 9:03 pm

worn wooden floor

by mustdo » Thu Apr 19, 2012 2:30 pm

Hi,
trying to do our bathroom up and lay vynl cushionair floor covering.

The wooden floor is in bad condition (planks) very uneven,split and bits missing.

On lifting 2 floor boards near the bath we find that all the pipe work has just been cut out of the joists and is level with the top of the joist

We know that the floor has to be levelled but how would we do this,with plywood but we do not know where all the pipes run and we live over a shop so cannot afford to have any leaks ect.

Would the best way to go
take all the floor boards up and relay with plywood,that way we can see the dangers.
I would appreciate any info regarding what you would do and what to purchase.

regards
Danny

welsh brickie
Project Manager
Project Manager
Posts: 2610
Joined: Sat Apr 12, 2008 8:54 am

Re: worn wooden floor

by welsh brickie » Thu Apr 19, 2012 8:43 pm

take up all the existing floorboards and lay T&G (tounge and groove) chipboard floorboards ,screw down the boards and glue the joints,this will prevent creaking..

mustdo
Apprentice
Apprentice
Posts: 5
Joined: Fri May 07, 2010 9:03 pm

Re: worn wooden floor

by mustdo » Sat Apr 21, 2012 2:03 pm

Hi,
many thanks for taking the time to reply to my question.
That's what we will be doing then.
When we finish I will let you know how it went
regards

3 posts   •   Page 1 of 1
It is currently Sat Dec 07, 2024 11:32 pm