Sealing a solid oak floor
Kitchens, doors, rails, stud, tables, chairs, stair cases, garden furniture etc... Find answers and ask questions here!

4 posts   •   Page 1 of 1
Scoot2079
Labourer
Labourer
Posts: 2
Joined: Mon Aug 13, 2007 1:06 pm

Sealing a solid oak floor

by Scoot2079 » Mon Aug 13, 2007 1:42 pm

I have recently had a solid oak floor laid in my living room but am getting concerned about washing it in case the water will penetrate the wood at the joins and cause it to swell. What would i use to seal the floor to prevent this from happening?

Oddbod
Ganger
Ganger
Posts: 104
Joined: Sun Jul 15, 2007 1:50 pm

by Oddbod » Fri Aug 17, 2007 2:52 pm

Hi. If the floor has been laid properly, expansion will have been taken care of. Either via an allowance around the edge, or though the joints where the edges of the boards meet.

Then assuming the floor IS solid oak and not some kind of composite, and provided you don’t leave the floor soaking for days, a wash and wipe will do it no harm at all.

Many people do finish oak floors and there are loads of products out there. I have used Liberon (google for it) products in the past, but that’s just my preference. Most of the manufacturers websites have quite good instructions on how best to use their products.

One tip, unfinished oak is not slippery it gets wet, finished oak could be. May matter, may not.

joust180
Apprentice
Apprentice
Posts: 9
Joined: Thu Apr 12, 2007 7:50 pm

by joust180 » Mon Sep 03, 2007 8:33 pm

Bona Chemi Mega!! I know it doesn't sound right but that came from the man at the top..............

Oddbod
Ganger
Ganger
Posts: 104
Joined: Sun Jul 15, 2007 1:50 pm

by Oddbod » Tue Sep 04, 2007 1:56 pm

Thanks Joust, that was one I hadn't come across before!

4 posts   •   Page 1 of 1
It is currently Sun Nov 24, 2024 1:34 am