Air lock in the cold water system.
All aspects of plumbing questions and answers, help, tips and information

2 posts   •   Page 1 of 1
vikingod
Labourer
Labourer
Posts: 1
Joined: Tue Aug 14, 2007 10:13 am

Air lock in the cold water system.

by vikingod » Tue Aug 14, 2007 10:29 am

Hi all you experts!

My water flow to the cold taps on the first floor (there are only two floors) has stopped completely. Downstairs water is fine - full pressure and all that - and the hot water to the first floor seems fine, too. I have tried to flush the water out by fixing the outside water tap up to the baths cold water tap with a hose and flushing what we were told was an air lock out. I have done this twice but both times the cold water supply has stopped after either a few weeks or, as with the last time, only after a few hours.

So I'm asking these questions of you all;

1) Is it an air lock I am dealing with?
2) Am I doing the right thing?
3) If I AM doing the right thing am I doing it for long enough?

Any help or advice would be greatly appreciated!
Many Thanks.

andy.blackpool
Apprentice
Apprentice
Posts: 20
Joined: Sat Aug 25, 2007 12:04 am

by andy.blackpool » Sat Aug 25, 2007 12:31 am

if its an airlock, that'll probably sort it but dont do it for too long or the storage tank will overflow

2 posts   •   Page 1 of 1
It is currently Fri Nov 22, 2024 9:07 pm