outside lighting
Ask questions and find answers to many subjects relating to electrics and electrical work

4 posts   •   Page 1 of 1
trevor123
Tradesman
Tradesman
Posts: 28
Joined: Thu Aug 23, 2007 8:22 pm

outside lighting

by trevor123 » Sun Mar 16, 2008 12:32 pm

hi, in my porch i have a 2 way switch, 1 controls the inside light the other controls the outside light. i would like to change the outside to 1 with a pir, is this possible with the use of the affore mentioned switched or does it need a permanent live feed to it and use the pir as a switch?
________
Yamaha YM3526
Last edited by trevor123 on Fri Feb 04, 2011 12:33 am, edited 1 time in total.

ericmark

by ericmark » Sun Mar 16, 2008 8:48 pm

Many PIR's have their function set by switching the supply on and off so you really do need a switch.

trevor123
Tradesman
Tradesman
Posts: 28
Joined: Thu Aug 23, 2007 8:22 pm

by trevor123 » Sun Mar 16, 2008 9:30 pm

so its just a case of replacing the light fitting then? no adaptations to the electrics needed, thanks very much
________
roll a joint
Last edited by trevor123 on Fri Feb 04, 2011 12:33 am, edited 1 time in total.

stevenc1603
Ganger
Ganger
Posts: 199
Joined: Tue May 08, 2007 12:59 pm

by stevenc1603 » Tue Mar 25, 2008 2:40 pm

Yes. If you run it of the existing switch it can easily be isolated to change bulbs etc, plus some security lights have a function whereby you flick the switch off then back on within a few seconds and it will light up permanently until its switched off again.

4 posts   •   Page 1 of 1
It is currently Sat Nov 23, 2024 1:53 am