Replace a raiator with towel rail on a Combi bolier system
Advice and information on tiling and fixing tiles to a variety of surfaces

4 posts   •   Page 1 of 1
glyn
Labourer
Labourer
Posts: 2
Joined: Sun Mar 11, 2007 9:31 am

Replace a raiator with towel rail on a Combi bolier system

by glyn » Mon Apr 14, 2008 8:39 pm

I have to change a radiator to a towel rail and the the problem is that the boiler is a Combi boiler - How do I remove the radiator?

rosebery
Project Manager
Project Manager
Posts: 2021
Joined: Wed Sep 26, 2007 9:55 pm

by rosebery » Tue Apr 15, 2008 1:14 am

Turn off the water at the mains stopcock.

Drain down the system.

Change the rad for the towel rail.

Repressurise the system.

Cheers

PS Not a tiling question and you'll find this one has been answered relatively recently in the plumbing section.

chris_on_tour2002
Project Manager
Project Manager
Posts: 1024
Joined: Thu Aug 30, 2007 10:14 pm

by chris_on_tour2002 » Fri Apr 18, 2008 2:13 pm

rosebery - is it strictly necessary to shut of the water main? if the boiler has a filling loop there shouldn't be any immediate danger of accidental filling.

rosebery
Project Manager
Project Manager
Posts: 2021
Joined: Wed Sep 26, 2007 9:55 pm

by rosebery » Fri Apr 18, 2008 7:18 pm

Chris

How else do you completely take the pressure off the system? I grant you that it shouldn't be necessary except if you are working on the DHW but it's probably not a bad practice for someone who only does a bit of plumbing work now and again on a DIY basis.

Cheers
Last edited by rosebery on Sat Apr 19, 2008 9:39 am, edited 1 time in total.

4 posts   •   Page 1 of 1
It is currently Sun Dec 22, 2024 6:45 am