Towel rad fittings All aspects of plumbing questions and answers, help, tips and information

[carruthers]

Help ,please
I am replacing a 500 x 700 rad with a towel rail the same size, but the fittings for the towel rail are at the back and are at 460mm whilst the existing rad is at 500mm. How do I make the connection. The supply is on 9 or 10mm copper and come out through the skirting about 18mm off the floor.
Any advice would be much appreciated.
Regards
Carruthers

[Steve the gas]

Hi,

You prolly need the pipework altering and use angled rad valves.

Hth

[carruthers]

Thanks to Mike the gas, had thought that might be the case.
Cheers
Carruthers