Mould spots in bedroom
Damp can be a major issue in the home. Find answers to questions or post your own here.

5 posts   •   Page 1 of 1
jules66
Labourer
Labourer
Posts: 3
Joined: Sat Dec 13, 2008 9:59 pm

Mould spots in bedroom

by jules66 » Sat Mar 14, 2009 8:10 pm

We have lived in the same 1900's terraced house for 13 years. In the past year I have noticed mould spots appearing on the bedroom wall. This is a 1st floor room and the distribution of the spots is fairly random. The wall does not feel damp and the spots are about the size of a 50p but there are lots of them. Is this a ventilation problem? We have two replacement PVC windows in the room and both bottom panes have condensation within them. Any Advice?

stoneyboy
Project Manager
Project Manager
Posts: 6534
Joined: Wed Dec 10, 2008 6:44 pm

by stoneyboy » Sun Mar 15, 2009 10:29 pm

jules66,
First move is to eliminate condensation as a problem, do you leave the windows open, is there a night vent position or trickle ventilators, do you use the room with the windows closed?
Condensation in the DGUs is not related.
end

rosebery
Project Manager
Project Manager
Posts: 2021
Joined: Wed Sep 26, 2007 9:55 pm

Re: Mould spots in bedroom

by rosebery » Sun Mar 15, 2009 10:43 pm

"Is this a ventilation problem?"

Yes and it proably stems from the time that the replacement windows were put in.

"We have two replacement PVC windows in the room and both bottom panes have condensation within them."

When was this done? If still under warranty get the supplier back in to get these replaced.


Cheers

jules66
Labourer
Labourer
Posts: 3
Joined: Sat Dec 13, 2008 9:59 pm

by jules66 » Mon Mar 16, 2009 9:58 am

Thanks for the response. We do have a night vent position on the windows but don't often use them so obviously this could be our problem. The windows are still under guarantee so I will look into getting the company back to replace the bottom of each unit.
Should we remove the wall paper and redecorate or just wipe the wall down with a mould killer?

rosebery
Project Manager
Project Manager
Posts: 2021
Joined: Wed Sep 26, 2007 9:55 pm

by rosebery » Mon Mar 16, 2009 10:48 pm

1 Use the vent.

2 If the mould is just on the surface then just clean it off. If its under the paper and or in the plaster then its a redecorate job I'm afraid.

Cheers

5 posts   •   Page 1 of 1
It is currently Fri Nov 22, 2024 2:29 pm