Gas hod has stopped working :-(
Information, help and advice on many gas related subjects from gas fires to domestic appliances

4 posts   •   Page 1 of 1
andy.g.allen
Labourer
Labourer
Posts: 3
Joined: Tue Jun 02, 2009 10:30 am

Gas hod has stopped working :-(

by andy.g.allen » Tue Jun 02, 2009 10:35 am

I have a 4 flame gas hob and one of the flames has stopped working. Have checked where the gas comes out etc and it's all clean, but there is absoultely no noise of gas coming out when I turn the gas on to the flame that isn't working. Something easy that I can check or how much would a call out cost roughly?

Ta

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Tue Jun 02, 2009 6:03 pm

The injector may be blocked, you have to weigh up the cost of a call-out against the age, condition and cost of a new hob.


htg

willie gas
Apprentice
Apprentice
Posts: 10
Joined: Fri May 08, 2009 6:24 pm

by willie gas » Wed Jun 03, 2009 11:02 pm

hi it does sound like a blocked injector, if you can see the injector one way to clear it is, remove one single hair out of a paint brush & try to push it through the middle of the injector,this should clear the blockage. good luck

TheDoctor4
Project Manager
Project Manager
Posts: 16777203
Joined: Tue Jul 24, 2007 10:12 am
Location: Somerset in the UK in Shepton mallet

Help from DIY Doctor!

by TheDoctor4 » Thu Jul 01, 2010 9:36 pm

For up to 5 FREE quotes from trusted, vetted and insured tradesmen in your area visit the DIY Doctor Find a Tradesman page: https://www.diydoctor.org.uk/find_tradesmen/

4 posts   •   Page 1 of 1
It is currently Sun Dec 29, 2024 6:44 pm