Painting plaster
General decorating topics, questions and answers. find help, tips and advice on completing your decorating projects

4 posts   •   Page 1 of 1
sparkly123
Labourer
Labourer
Posts: 1
Joined: Mon Nov 29, 2010 8:57 pm

Painting plaster

by sparkly123 » Mon Nov 29, 2010 9:04 pm

Recently had a ceiling plastered, and the plasterer said it would be ready to paint within a few days. We waited until it looked completly dry. We then painted it, after 2coats it was still patchy, not realising you had to water down the paint first, im worried that the paint is going to fall off now, is there anything i can do?

theshedman
Foreman
Foreman
Posts: 210
Joined: Thu Jul 09, 2009 12:11 pm

by theshedman » Tue Nov 30, 2010 12:15 pm

Hi, you should have put a mist coat on first as you now know. It is possible that the paint you have put on has not adhered properly to the ceiling and this will cause it to peel or bubble in places when you put on another coat. Not a lot you can do about it unless you want to see if it scrapes off easily. You could just put on another coat and see what happens, you may be lucky if the paint you used was not too thick and has adhered a bit.

pixieelott
Labourer
Labourer
Posts: 1
Joined: Sun Dec 05, 2010 9:43 am

by pixieelott » Sun Dec 05, 2010 9:47 am

Hello,
yes theshedman is right you have to do coating first then you have to paint on that.mist coat helps to fill all type of things that remained in that plastering.

good luck!!

JRS
Ganger
Ganger
Posts: 188
Joined: Thu May 27, 2010 9:29 pm

by JRS » Sun Dec 05, 2010 9:14 pm

pixieelott wrote:Hello,
yes theshedman is right you have to do coating first then you have to paint on that.mist coat helps to fill all type of things that remained in that plastering.

good luck!!


Did you have a few drinks when you wrote this :lol:

To clear up yes shed man was/is correct. A thin coat will absorb into the surface more, take more hold rather than sit on the surface, quite like a siv.

4 posts   •   Page 1 of 1
It is currently Sat Nov 16, 2024 2:06 pm