Paint on entrance gates has run
General decorating topics, questions and answers. find help, tips and advice on completing your decorating projects

4 posts   •   Page 1 of 1
seaspray99
Labourer
Labourer
Posts: 1
Joined: Sun Apr 10, 2011 6:51 pm

Paint on entrance gates has run

by seaspray99 » Sun Apr 10, 2011 6:55 pm

Hi I primed two entrance gates and used Dulux Once which is an undercoat and top coat combined paint, I appreciate its rubbish, I was in a rush to try and finish the gates, anyway the paint was put on thick and its run and gone streaky and has the Orange peel effect, its a bad job, its been on 4 days and is still soft.

The question is what is the quickest way to remedy the situation ?

Many thanks for your time !

:-)

chris_on_tour2002
Project Manager
Project Manager
Posts: 1024
Joined: Thu Aug 30, 2007 10:14 pm

by chris_on_tour2002 » Mon Apr 11, 2011 12:59 pm

solvent based paints will remain soft for several weeks after application.

i suggest you leave it a few weeks, give it a good sand and then repaint with an undercoat and separate top coat.

JRS
Ganger
Ganger
Posts: 188
Joined: Thu May 27, 2010 9:29 pm

by JRS » Mon Apr 11, 2011 6:01 pm

Dulux once is just a name to com people in my opinion, Get a proper undercoat and gloss. But would leave it a few days sand it down and recoat properly

chris_on_tour2002
Project Manager
Project Manager
Posts: 1024
Joined: Thu Aug 30, 2007 10:14 pm

by chris_on_tour2002 » Tue Apr 12, 2011 10:09 am

As a DIY product Dulux Once is fine if used correctly on prepainted surfaces where the existing paint is sound and only requires a light sanding.

It is not really the stuff to use for this application. Furthermore gloss paint will always run and streak if applied too thick.

4 posts   •   Page 1 of 1
It is currently Fri Nov 15, 2024 10:46 pm