Re-hanging swing doors
Kitchens, doors, rails, stud, tables, chairs, stair cases, garden furniture etc... Find answers and ask questions here!

2 posts   •   Page 1 of 1
britainlovesgreys
Apprentice
Apprentice
Posts: 5
Joined: Wed Aug 22, 2007 10:18 pm

Re-hanging swing doors

by britainlovesgreys » Sat Oct 11, 2008 10:22 pm

I am trying to re-hang a set of swing doors from our utility room. Everything is fine, except that on one wall everytime I put a screw in the weight of the door pulls it out.
They are the same doors and same screws. I have tried using the existing holes and plugging them, and have now plastered over these and started again in a different spot. But the screws are still coming out of the wall.
Any advice? Please.

chris_on_tour2002
Project Manager
Project Manager
Posts: 1024
Joined: Thu Aug 30, 2007 10:14 pm

by chris_on_tour2002 » Mon Oct 13, 2008 11:27 pm

fatter screws is one option. i've seen this problem solved with varying degrees of success with rawl plugs. but if it were me i'd redo the hinges so the screw into the frame in a different place.

2 posts   •   Page 1 of 1
It is currently Mon Feb 19, 2024 6:51 pm