Search found 8 matches

by lee_p
Mon May 04, 2009 8:22 pm
Forum: Tiles and Tiling Forum
Topic: Black Quartz Floor Tiles
Replies: 3
Views: 4985

Damian you need to nick the pan scrubber from the kitchen the one with the green face or buy so scotch pads from local shop. Using them dry buff the remaining grout from tile faces.
by lee_p
Fri Mar 13, 2009 9:01 am
Forum: Flooring and Floor Coverings Forum
Topic: Bonding plywood to concrete floor
Replies: 2
Views: 7062

Don't bother trying to get the ply to stick to concrete. Run 6mm ply across floor boards and then stop at concrete edge, seal along edge to stop self leveller from escaping and pour mixture would be best to prep concrete first to take self levelling mixture with a pva mixture.
by lee_p
Sat Mar 29, 2008 7:44 am
Forum: Electrics Forum
Topic: 1500 Watt Lawn Mower
Replies: 3
Views: 3054

Thanks Eric back to hunting for a new lawn mower max 1000 watt prefably with soft start

Thanks

Lee
by lee_p
Fri Mar 28, 2008 8:14 pm
Forum: Electrics Forum
Topic: 1500 Watt Lawn Mower
Replies: 3
Views: 3054

1500 Watt Lawn Mower

Can you tell me if running a 1500 Watt lawn mower is ok on a 5 amp fuse it is a main fuse box feed into garage with a 5 amp fuse in it ( 1 5 in main box 1 5 in garage).


Thanks


Lee
by lee_p
Sun Jan 27, 2008 9:35 pm
Forum: Electrics Forum
Topic: Ensuite recessed downlights
Replies: 4
Views: 3310

After going in depth on Part P for my new kitchen lights and sockets 1)If there was already a light in the ceiling then you are OK to change it or amened fittings. 2)Adding plug sockets is a big yes on Part P(one double in whole kitchen now got 8) This info was passed to me by a Part P Electrician a...
by lee_p
Sun Jan 27, 2008 9:21 pm
Forum: Fencing Forum
Topic:
Replies: -1
Views:

If you are using base panels then line the first post up to take base and panel then cut a piece of scrap wood to the height of the panel, move onto second post fit base panel and sit wood on top to get correct height of post or get a long spirit level across tops of post.
by lee_p
Sat Jan 26, 2008 7:25 pm
Forum: Flooring and Floor Coverings Forum
Topic: How to finish beading?
Replies: 1
Views: 4231

Cut the bead so that it finishes level with door frame i.e 30 to 45 deg or drop the belt sander in vice and round them off.
by lee_p
Sat Jan 26, 2008 7:03 pm
Forum: Flooring and Floor Coverings Forum
Topic: Lowering bathroom floor
Replies: 3
Views: 5051

Don't do it, you'll be sat down stairs if you put 4*2 in. Can you not raise the ceiling height instead as this is much easier?
It is currently Sat Nov 23, 2024 1:31 am