Search found 53 matches

by Barry Bunsen
Sun Jun 24, 2012 8:57 am
Forum: Plumbing Forum
Topic:
Replies: -1
Views:

Re: thermostatic mixer shower pressure

Hi I think you have a few issues here. Firstly I cannot see that the bath filling problem has anything to do with the shower. It seems your hot water flow rate is poor. If the hot water to the bath fills slower than it used to (or slower than your neighbours) there may be a blockage or air lock in t...
by Barry Bunsen
Mon Apr 30, 2012 4:26 pm
Forum: Plumbing Forum
Topic: Immersion heater with a combi boiler
Replies: 2
Views: 9898

Re: Immersion heater with a combi boiler

Hi Firstly I wouldnt do it myself. I have known people use a solar system to fuel an immersion heater but not with a combi. You could change your boiler to a condensing system boiler and make the necessary alterations from there. However, I suppose if you set up a separate hot water system alongside...
by Barry Bunsen
Thu Mar 29, 2012 8:16 am
Forum: Plumbing Forum
Topic: Warm water from cold taps
Replies: 5
Views: 15746

Re: Warm water from cold taps

Hi I would first turn the water heater off for a few hours and check the cold water then behaves normally. You can then be sure the warm water is heated by your water heater before entering the cold taps. If that is the case it can only be getting there via a mixer tap or shower (or possibly the hea...
by Barry Bunsen
Tue Jan 24, 2012 9:05 am
Forum: Plumbing Forum
Topic: How do the pro's do it? - drained but not empty
Replies: 7
Views: 2795

Re: How do the pro's do it? - drained but not empty

I sometimes use a 20ml syringe with a section of transparent flexible pipe attached
Not 100% effective but worth keeping in the toolkit.
by Barry Bunsen
Sat Jan 14, 2012 9:03 pm
Forum: Plumbing Forum
Topic: Head of water
Replies: 1
Views: 1940

Re: Head of water

Water head pressure is static pressure caused by the weight of water solely due to its height above the measuring point. The pressure at the bottom of a 40-foot lake or a 40-foot high thin tube would be identical, since only height is involved. I just got this from the internet. It explained the poi...
by Barry Bunsen
Sat Dec 17, 2011 2:05 pm
Forum: Plumbing Forum
Topic: No cold water to bath or toilet upstairs
Replies: 6
Views: 55108

Re: No cold water to bath or toilet upstairs

Hi
The cold water to the kitchen will almost certainly be supplied by the water main.
The cold water in the bathroom most probably comes from the big tank in the loft.
Unless you have 2 big tanks in the loft it probably fills up the hot water cylinder as well.
Does the hot water work ok?
by Barry Bunsen
Sun Nov 20, 2011 9:32 pm
Forum: Plumbing Forum
Topic: No water upstairs
Replies: 3
Views: 7004

Re: No water upstairs

It is probably the water flow that is concerning you rather than water pressure, although the 2 are linked. You should still get water flow upstairs when a downstairs tap is turned on with a combi but the flow will be reduced. Electric showers can go cold when the washing machine kicks in for exampl...
by Barry Bunsen
Tue Sep 20, 2011 8:24 am
Forum: Plumbing Forum
Topic: To Pump or not to Pump, that is the question!
Replies: 3
Views: 2581

Re: To Pump or not to Pump, that is the question!

[quote="Barry Bunsen"]unless you want to fit a new tank in the loft and use it just for the shower via the pump[/quote] Sorry. Should have clarified. With a combi the tank would have to feed a pumped electric shower such as one that Triton produce, where the pump is part of the electric sh...
by Barry Bunsen
Mon Sep 19, 2011 5:28 pm
Forum: Plumbing Forum
Topic: To Pump or not to Pump, that is the question!
Replies: 3
Views: 2581

Re: To Pump or not to Pump, that is the question!

Yes that is just about right unless you want to fit a new tank in the loft and use it just for the shower via the pump. Generally speaking a thermostatic shower will work fine in your case as the pressure is more or less mains pressure. If it was me I would pipe up straight to the shower. A useful t...
by Barry Bunsen
Mon Sep 12, 2011 5:11 pm
Forum: Plumbing Forum
Topic: Draining cold water tank
Replies: 4
Views: 23942

Re: Draining cold water tank

Interesting. I assume the tank is not the one that tops up the central heating. I also assume you have a traditional hot water cylinder and not a combi boiler. The cold water tank should therefore top up at least the hot water cylinder and possibly the bathroom cold water and the toilet as well. For...
by Barry Bunsen
Mon Sep 05, 2011 12:51 pm
Forum: Plumbing Forum
Topic: Shower Advice Please
Replies: 1
Views: 1835

Re: Shower Advice Please

Your advice seems a bit muddled. To get true equal pressure you would need tank(s) in the loft for a cold feed and hot feed via a hot water cylinder, unless you settle for a complicated system with pressure reducing valves. You cannot balance the hot water side by installing a tank just for the cold...
by Barry Bunsen
Sat Aug 13, 2011 6:59 pm
Forum: Plumbing Forum
Topic: Help! No hot water or heating after burst pipes!
Replies: 1
Views: 3842

Hi 3 different pipes! Didnt the water coming out of the first pipe ring any warning bells? Never mind. My guess is that at least one pipe was a central heating pipe and you have an airlock in the system - maybe in the boiler itself. The water would then be heating in the boiler without circulating p...
by Barry Bunsen
Wed Jul 27, 2011 4:54 pm
Forum: Plumbing Forum
Topic: Overflow from Cold Water Tank in Loft
Replies: 4
Views: 16518

Hi Usually when an overflow behaves like this it is because the ball valve is not stopping the water flow completely and letting just a small amount of water through. If the toilets are flushed regularly the excess water never reaches the overflow pipe. If they are not used the water continues to fi...
by Barry Bunsen
Thu Jul 21, 2011 4:09 pm
Forum: Plumbing Forum
Topic: Speedfit Flexi Tap Connectors
Replies: 2
Views: 3458

Hi
Sink and basin taps are nearly always half inch and bath taps three quarter inch.
by Barry Bunsen
Wed Mar 30, 2011 8:05 am
Forum: Plumbing Forum
Topic: Cold Water Storage Tanks
Replies: 2
Views: 3372

Thanks for your reply stoneyboy. Looks good advice.
It is currently Sun Nov 24, 2024 1:18 pm