Help ,please I am replacing a 500 x 700 rad with a towel rail the same size, but the fittings for the towel rail are at the back and are at 460mm whilst the existing rad is at 500mm. How do I make the connection. The supply is on 9 or 10mm copper and come out through the skirting about 18mm off the ...
Hi Paul
Thanks for that advice, I must admit that I had thought that might be the case but having spent so much time on my knees - you know the rest and it wasn't in church!!!
Regards Carruthers
Hi everyone - HELP I have laid 17 sq m of Courtyard style floor tiles (ex Wickes) they are 400mm sq and have 4 dummy tiles on them. The problem is that the family have walked on them before the adhesive had dried properly, therefore they now move if you stand on one edge and crack the grout. I have ...
Does anyone have the answer to the finishing of the 'skirting' finish to a quadrant stone cast shower tray that has to be raised to accommodate the waste. The floor is concrete. I can't seem to find anything in the DIY sheds, that is made for the job.
Any suggestions? Please
Hi Oddbod Thanks for your response. The overall size is 8'6" wide (so a pair of 4'3"" gates) All joints will have to be hand cut including the mortise and tenons (I am not familiar with 'draw bore') what is this? Would the inclusion of connectors be of help with the facing boards? I u...
I am intending to construct a pair of driveway gates 8'6" wide x 5'6" high. Advice please as to the best type of joints to use and what section of timber. I would like to have a close boarded front. Do I use timber connectors on half laps, how do I fit the diagonal brace to the styles, and...
