Did you change the time on the cooker and its still in automatic mode, usually there might be a button on the front with a little hand symbol press this and it might come back to life.
Hi, Have you checked the fan in that oven, its quite easy to access, if you take the oven shelves out and then look to the back of the oven there will be a cover plate usually held in place by 4-6 screws if you remove this cover you should see the fan it may be seized or gunked up with grease out th...
Hi Arthur, Here are the parts that should be correct for use in your Hotpoint AQC94F7EM1(UK) tumble dryer. The belt check the size of your belt matches the size given on the product page m Pulley wheel is for the BPM motor which i believe is fitted to your machine, replacing both at the same time is...
Hi, Yes it would be better if the tensioner pulley ' Jockey wheel' was better made with good bearings, but then things would not break down so often!!! Can you remember if the parts came in genuine Hotpoint packets as the part numbers should have been on those? Is the dryer currently working ok? Reg...
Hi, If that is the only cold feed pipe it also looks like it has something already connected, maybe your washing machine? You could use a Y connector i would advise getting a brass one not the plastic version. Waste water will need to go out via your U bend if you do not have a stand alone waste pip...
Hi, How old is the hose? reason i ask is the washers do perish over time, you could always try some PTFE tape around the threads on the valve before you put the hose on. When you push the washing machine back is this causing the problem? I think going for the expensive ice machine hose that you post...
